Yandex.Metrika
email info@szyujiaxin.com
御嘉鑫LOGOSHENZHEN YUJIAXIN TECH CO.,LTD.
TECHNOLOGY
PRODUCTS
CONTACT US
  • Email: info@szyujiaxin.com
  • Skype: +8615986816992
  • Whatsapp: +8615986816992
  • Wechat: yujiaxin-666
  • QQ: 2269845694
Your Current Position :Home > TECHNOLOGY > Detailed Process Description

What are the general causes of peeling on the surface of die castings after shot blasting?


 

Date:[2023/10/23]
 

1. The mold or melting cup is not cleaned thoroughly;

2. If the injection pressure is not enough, it is also necessary to pay attention to whether there is any yielding phenomenon of the dynamic mold during injection;

3. There are issues with the opening of the pouring system;

4. Caused by excessive mold temperature;

5. Improper handling of mold materials;

6. Severe splashing of metal liquid during injection;

7. Problem with release agent: The release agent generally does not penetrate into the die casting. However, low-quality release agents can cause corrosion on the surface of die-casting parts and penetrate into the interior; If the release agent emits a large amount of gas, it will be drawn into the die casting to form pores.

Keywords: precision die-casting zinc aluminum alloy die-casting stainless steel die-casting precision casting aluminum alloy die-casting zinc alloy die-casting die-casting processing Yujiaxin